Br+CH3S(O)CH3反应机理的直接动力学研究

采用直接动力学的方法，对多通道反应体系Br＋CH3S（O）CH3进行了理论研究．在BH＆H-LYP／6-311G（2d，2p）水平下获得了优化几何构型、频率及最小能量路径（MEP），能量信息的进一步确认在MC-QCISD（单点）水平下完成．利用正则变分过渡态理论，结合小曲率隧道效应校正（CVT／SCT）方法计算了该反应的两个可行的反应通道在200K～2000K温度范围内的速率常数．在整个反应区间内，生成HBr的反应通道与生成CHa的反应通道存在着竞争，前者是主反应通道，后者是次反应通道．变分效应和小曲率隧道效应对反应速率常数的计算影响都很小．理论计算得到的两个反应通道的反应速率常数与实验值符合得很好．     

富硒灵芝中一种新含硒蛋白的纯化、性质及其自由基清除活性研究

通过硫酸铵沉淀、离子交换层析和分子排阻层析等方法, 从富硒灵芝中获得了一种新的含硒蛋白, 命名为Se-GL-P, 并研究了此蛋白的性质、抗氧化活性与其硒含量间的关系. 结果表明, 此蛋白的分子量为36600, 分子中约含有19.8%的糖链, N端的氨基酸残基序列为DINGGGATLPQKLYLTPDVL, 属于DING蛋白家族. 硒含量为4.87 mg/g, 具有较高的羟自由基和超氧自由基清除活性. 研究发现, Se-GL-P的抗氧化活性的提高与其中硒含量的提高相关.     

Development and implementation of a high temperature electrochemical cell for lithium batteries

An electrochemical cell designed to perform high temperature lithium battery tests has been developed adapting a typical Swagelok^® cell. The high temperature cell is intended to work in a wide temperature range, namely from room temperature up to 300 °C. It has been successfully tested at 250 °C using LiFePO₄ as cathode, LiTFSI as molten salt electrolyte and metallic lithium as anode.     

一维链状柔性羧酸镉配位聚合物[Cd(p-BDOA)·2H2O]n的合成、结构与性质研究(英)

A novel 1-D Cd(Ⅱ) coordination polymer, [Cd(p-BDOA)·2H₂O]_n(I) ( p-BDOA^2-=benzene-1,4-dioxyacetate dianion) has been synthesized and characterized by elemental analysis, IR, PL, TG and X-ray single crystal diffraction. The Crystal crystallizes in monoclinic system, the space group is C2/c, with the crystal cell parameters a=1.175 1(1) nm, b=0.551 0(1) nm, c=1.827 7(2) nm, β=96.14(2)°, and V=1.176 6(3) nm^3,, M_r=372.60, R=0.045 9, wR=0.127 9. The Cd(Ⅱ) ion has a trigonal prism coordination configuration that defined by four carboxyl O atoms from two different p-BDOA^2- ligands and two water molecules. Adjacent Cd(Ⅱ) ions are linked by carboxylate groups with the bidentate coordination mode, giving rise to a chain structure with the adjacent Cd…Cd distance of 1.526 3(5) nm. Furthermore, such chains are linked by hydrogen bonds to form supramolecular network. The results of PL and TG show that the complex exhibits intense fluorescent emissions and its chain skeleton is thermally stable up to 419 K. CCDC: 220443.     

铝镧修饰MCM-41介孔分子筛的合成、表征及在乙氧基化反应中的催化性能

以十六烷基三甲基溴化铵(CTAB)为模板剂,正硅酸乙酯(TEOS)为硅源,乙二胺为碱性介质,水热法合成了硅铝、硅镧及硅(铝 镧)摩尔比为30的Al-MCM-41、La-MCM-41和Al-La-MCM-41介孔分子筛,通过XRD、IR、NH3-TPD吸附脱附、BET、热分析及CCl4吸附等方法对分子筛的晶体结构和表面物性进行了研究,XRD及BET研究结果表明,所合成的分子筛具有典型的六方介孔结构特征及较大的比表面积.NH3-TPD结果表明所合成的介孔分子筛均达到中强酸酸度.将Al-MCM-41、La-MCM-41和Al-La-MCM-41分别用于催化乙氧基化反应,研究结果表明Al-La-MCM-41具有更高的催化活性,Al-La-MCM-41为正辛醇质量的5%,反应温度为120℃,反应压力0.2MPa,n(醇)∶n(环氧乙烷)=1∶3时,正辛醇聚氧乙烯醚产品的收率达92%.     

二甲醚电氧化及其阳极催化剂研究

Anode electro-catalysts for direct dimethyl-ether fuel cell (DDFC), Pt/C, PtRu/C (1∶1) and PtSn/C (3∶2), were prepared by chemical impregnation-reduction method with formaldehyde as the reductant. DME electro-oxidation and adsorption at Pt electrode and Pt electro-catalysts were investigated by Cyclic Voltammetry(CV), Quasi-steady state polarization and Gas Chromatography(GC). CV showed that there were two current peaks of DME electro-oxidation at Pt electrode around 0.8V (vs RHE); DME was adsorbed at Pt electrode more weakly and slowly than oxygen, methanol, even hydrogen; the onset potential of DME oxidation was 50mV less than that of methanol, and DME peak potential 110 mV lower, thus more advantageous for using in fuel cells than methanol. GC showed that small amount of HCHO was generated during DME electro-oxidation. The mechanism of DME electro-oxidation was proposed. Among the three electro-catalysts (Pt/C, PtRu/C and PtSn/C), Pt alloy catalysts, especially PtRu/C, showed a higher performance toward DME electro-oxidation, as in the case of methanol. Temperature experiments showed that both DME electro-oxidation and adsorption on Pt and Pt alloy catalysts were favored with increased temperature.     

Geometries,vibrational frequencies,and electron affinities of X2Cl (X=C,Si,Ge) clusters

Ab initio quantum chemical calculations have been performed on X₂Cl^? and X₂Cl (X = C, Si, Ge) clusters. The geometrical structures, vibrational frequencies, electronic properties and dissociation energies are investigated at the Hartree–Fock (HF), Møller–Plesset second‐ and fourth‐order (MP2, MP4), CCSD(T) level with the 6‐311+G(d) basis set. The X₂Cl (X = C, Si, Ge) and X₂Cl^? (X = Si, Ge) take a bent shape obtained at the ground state, while C₂Cl^? has a linear structure. The impact on internal electron transfer between the X₂Cl and the corresponding anional clusters is studied. The three different types of electron affinities (EAs) at the CCSD(T) are reported. The most reliable adiabatic electronic affinities, obtained at the CCSD(T)/cc‐pvqz level of theory, are predicted to be 3.30, 2.62, and 1.98 eV for C₂Cl, Si₂Cl, and Ge₂Cl, respectively. The calculated EAs of C₂Cl and Ge₂Cl are in good agreement with theoretical results reported. The correlation effects and basis sets effects on the geometrical structures and dissociation energies are discussed. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Effective removal of chlorinated organic pollutants by bimetallic iron-nickel sulfide activation of peroxydisulfate

Chlorinated organic pollutants(COPs) have caused serious contaminants in soil and groundwater,hence developing methods to remove these pollutants is necessary and urgent.By a simple hydrothermal method,we synthesized the bimetallic iron-nickel sulfide(FeNiS) particles which exhibited excellent catalytic property of COPs removal.FeNiS was chosen as the peroxydisulfate(PDS) activator to removal COPs including 4-chlorophenol(4-CP),1,4-dichlorophenol(1,4-DCP) and 2,4,6-trichlorophenol(2,4,6-TCP).The results show that FeNiS can efficiently activate PDS to produce sulfate radical(SO_4~(·-)) which plays major role in the oxidative dechlorination and degradation due to its strong oxidizing property and the ability of producing hydroxyl radicals(~·OH) in the alkaline condition.Meanwhile,the Cl-abscised from COPs during the dechlorination can turn into the chlorine radicals and enhance the degradation and cause further mineralization of intermediate products.This bimetallic FeNiS catalyst is a promising PDS activator for removal of chlorinated organics.     

高温固相法合成LiNi1/3Mn1/3Co1/3O2及其性能研究

采用高温固相法合成出层状锂离子电池正极材料LiNi_1/3Mn_1/3Co_1/3O₂。通过XRD、ICP、SEM和电化学测试手段对产物的结构、组成、形貌及电化学性能进行了研究。XRD结果表明此方法合成的LiNi_1/3Mn_1/3Co_1/3O₂具有标准的α-NaFeO₂型层状结构，SEM照片显示颗粒粒径大约在500 nm左右，粒径分布较窄。以20 mA·g^-1电流密度放电，充放电电压在2.8～4.4 V之间，其首次放电比容量为170 mAh·g^-1，40次循环容量保持率为85.3%。进一步加入石墨导电剂后，同样条件下首次放电比容量变为179 mAh·g^-1，50次循环容量保持率为89.6%。容量衰减主要发生在前10次循环。XRD和SEM测试表明循环初期容量衰减的原因是由材料本体结构变化和界面反应共同作用的结果。     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.